How to Use MpxTool v2.04 for FM Stereo Analysis
If you are interested in the technical side of FM broadcasting, you might want to try MpxTool v2.04, a modulation monitoring suite entirely in software. MpxTool v2.04 allows you to play, record, analyze, compare, encode and decode FM Stereo Composite (MPX) waveforms. You can use it to compare audio processors, calibrate your airchain, and monitor other stations off air.
In this article, we will show you how to download, install and use MpxTool v2.04 for FM stereo analysis. We will also explain some of the features and benefits of this software.
MpxTool v2.04.rargolkes
Download File: https://fienislile.blogspot.com/?download=2tGyH6
How to Download and Install MpxTool v2.04
MpxTool v2.04 is a discontinued product by the developer, but you can still find it online from various sources. One of them is MpxTool 2.0 Download (Free trial) - explorer.exe, where you can download a free trial version of the software.
To install MpxTool v2.04, you need to have a Windows operating system and a sound card with line-in and line-out ports. You also need a tuner with MPX output if you want to use MpxTool as an off-air modulation monitor and analyzer.
After downloading the software, run the setup file and follow the instructions on the screen. You will need to enter a license key to activate the full version of the software. You can find the license key from MpxTool v2.04 - Forum - uCoz, where you can also find more information and support about MpxTool.
How to Use MpxTool v2.04 for FM Stereo Analysis
MpxTool v2.04 has a user-friendly interface that allows you to access various functions and settings. Here are some of the main features of MpxTool v2.04:
Phase linear reference quality stereo encoder and decoder: This feature automatically encodes incoming L/R baseband to MPX, or decodes MPX to L/R baseband, for analysis. You can adjust the parameters such as pre-emphasis, pilot level, RDS level, etc.
Built-in signal generator with loop-back support: This feature allows you to generate different signals for calibration of sound card i/o, exciters, tuners, STLs etc. You can choose from sine waves, square waves, quick sweep, or bessel null signals.
FM exciter with RF spectrum analysis: This feature allows you to simulate an FM transmitter and analyze its RF spectrum. You can select different ITU-R or ETSI masks to check the compliance of your signal.
5-band phase linear parametric EQ: This feature allows you to apply equalization to the input or output signal. You can adjust the center frequency, width and gain of each band.
Playback A/B switching and bookmarking: This feature allows you to compare two recorded files on-the-fly by switching between them. You can also bookmark certain points in the files for easy reference.
Advanced calibration/compensation features: This feature allows you to compensate for non-flat subsonic response or overshoot of your sound card or tuner by applying tilt correction, arc correction or peak-sensing DC servo.
DPO oscilloscope: This feature allows you to visualize the waveform of your signal with boundary-lines and optional peak-hold. You can switch between composite, de-modulated or de-emphasized sources.
FCC-accurate modulation monitor: This feature allows you to measure the modulation level of your signal with adjustable response time and peak flasher.
Spectrum analyzer: This feature allows you to analyze the frequency spectrum of your signal with peak-hold. You can choose from composite, RF, input (L/R), de-modulated (L/R) or de-emphasized (L/R) sources.
To use MpxTool v2.04 for FM stereo analysis, you need to connect your sound card line-in port to your tuner MPX output port, and your 29c81ba772
https://www.juicd.net/group/my-dr-told-me-i-have-to/discussion/c0f7f6a7-7fa5-4da2-a7f6-cdc384ecca7a